Shires ARMA Contour Pro Brushing Boots - White
$49.99
$34.99
Save $15.00
Boots That Keep Up With Your Horse
Brushing and splint boots cover the inside of the leg, where a horse can knock itself. Pick mesh for cooler legs, neoprene for daily work or a fleece lining for a softer fit.
Updated November 2026

Shop brushing and splint boots by maker
Find Your Fit
For the Horse
Pony and horse sizes
In the Spotlight
Splint boots cover the inside of a front or hind leg, and this shelf mixes Toklat's neoprene front and rear boots with Back on Track mesh and Centaur's traditional design.
Splint boots for front and hind legs
Neoprene and mesh splint boots from Toklat, Back on Track and Centaur
Riders tell us the brushing boots worth keeping stay put and hold up: an iVent pair that has lasted over a year, Woof Wear single-lock boots that wash and stay in place, and LeMieux mesh that adds protection without sweaty legs.
Woof Wear iVent Hybrid Brushing Boots
Woof Wear Ivent boots are great, they slipped on my Welsh D as they were a little big but on our Connie they don’t budge so you need to get the correct fit. But really good boots has them over a year now
Woof Wear Single-Lock Brushing Boot
I’ve tried so many different brushing boots and always go back to the old faithful Woofs! The cheap single locking ones. They wash well, last well, stay in place perfectly and cost nothing.
I prefer the Woof wear to the premier equine ones for hind legs - I find the PE ones tend to slip if not done tightly.
I have the LeMieux Mesh Brushing Boots in white and like them a lot. They add a little bit of extra protection without overheating the legs and making them super sweaty in the summer.
The Brushing Boot Edit
Each maker here solves a different problem: vented mesh for a horse that runs hot, neoprene for daily work, fleece for a horse that rubs. Start with how your horse sweats and moves, then match the lining and the closures.

Woof Wear
Woof Wear brushing boots start with 5.5mm neoprene. The Single-Lock Brushing Boot uses breathable neoprene that Woof Wear says won't retain water, with a shaped strike pad, nylon binding and recessed stitching, and the Double Lock Brushing Boots add a second touch-and-close strap for extra hold. The Sport Brushing Boot is the all-purpose version, with a full-coverage strike pad and a shape that molds around the fetlock joint. All three fit front or hind legs and are sold as a pair.
For more airflow, the iVent Hybrid Brushing Boots use a flexible TPU shell with a reinforced brushing area, a lightweight foam core and a lining that wicks sweat, and Woof Wear describes it as 360 degrees of cooling airflow. The double Secure-Grip closure holds the boot in place. Look elsewhere if you want a fleece-lined boot: the Equinavia and Nunn Finer boots below carry fleece.
Woof Wear brushing boots
Woof Wear Sport, Single-Lock, Double-Lock and iVent Hybrid brushing boots

Shires ARMA
Shires ARMA covers mesh, memory foam and hard-shell brushing boots. The Air Motion Brushing Boots are lightweight, with an Air Motion mesh fabric that lets air circulate, a strike-resistant pad on the inside and secure touch tape closures. Riders tell us they stay cool, and the two quotes below say so. The Air Motion SupaFleece version adds a SupaFleece trim against rubs.
The Contour Pro Brushing Boots have a memory foam core that springs back after each ride, a hardwearing knit outer and an ARMA strike pad shield with a cushioned inner. The OXI-ZONE Brushing Boots go further, with a vented shell, a molded strike pad and a waffle-weave lining that ARMA says is lighter than neoprene. For daily flatwork, the Neoprene Brushing Boots have a neoprene lining and contoured strike pads.
What Riders Say
Shires ARMA Air Motion Brushing Boots
I school in Arma Air Motion brushing boots when I’m jumping. They’re very lightweight and keep my horse’s legs quite cool but they give that little bit of extra protection as he figures out where his feet go, and they aren’t very expensive either.
Shires ARMA Air Motion Brushing Boots
When we school I usually use the Arma Air Motion brushing boots. Those things are so well-ventilated that his legs rarely feel any warmer than the rest of him after I take them off, even in the middle of the summer. I also use the Arma Oxi Zone open fronts and they aren’t quite as well-ventilated as the brushing boots but they’re still quite cool. We XC in Majyk Equipe brushing boots, which definitely aren’t as cool as the Armas but are a bit more substantial in case he whacks himself on a solid fence.
Shires ARMA brushing boots
Shires ARMA Air Motion, Contour Pro, OXI-ZONE and neoprene brushing boots

Equinavia
Equinavia covers four jobs. The Ty NordicAir Brushing Boots are its lightest and most breathable, made from perforated poly foam with a synthetic strike pad and a heavy-duty hook and loop closure, trimmed in ultra fleece. The Odin Flexi Brushing Boots swap the mesh for a flexible polyurethane shell with an extra layer in the strike zone, ventilated areas and three straps over a quick-dry lining.
The Vali Ultra Fleece Brushing Boot is an everyday boot with a faux leather outer, a padded strike pad and an ultra fleece lining that Equinavia calls softer and denser than real sheepskin; it machine washes on gentle and air dries. The Balder Brushing Boots are neoprene with an anatomic strike pad, two straps through size large and three on extra large, and you hose them off and hand dry.
Equinavia brushing boots
Equinavia Ty NordicAir, Odin Flexi, Vali Ultra Fleece and Balder brushing boots

Weatherbeeta
Weatherbeeta builds all three Tough-Tec brushing boots around a leather-look polyurethane strike pad, then changes what surrounds it. The Tough-Tec Prime Brushing Boots are soft, breathable neoprene with touchtape closures and are the everyday pick for flatwork and hacking.
The Tough-Tec Mesh Brushing Boots use a 3D mesh exterior that Weatherbeeta says lets air flow so legs are less likely to overheat. The Tough-Tec Comfy Fleece Brushing Boots have a leather-look polyurethane outer over a soft fleece interior, which Weatherbeeta says cushions against rubbing. Choose the Mesh in warm weather and the Comfy Fleece for a horse with sensitive skin.
Weatherbeeta brushing boots
Weatherbeeta Tough-Tec Prime, Mesh and Comfy Fleece brushing boots

LeMieux and more
LeMieux brushing boots are light and wash in the machine with the hook and loop fastened, then air dry. The Arika Mesh Brushing Boots have a ventilated, neoprene-free mesh shell with a strike guard and a sweat-wicking lining, and the Air-Tek Grafter Brushing Boots use perforated neoprene with a soft padded strike guard, in a Mini size for minis and ponies.
Horseware keeps a flexible shell under a polyurethane strike pad: the Classic Brushing Boots have a perforated neoprene lining and are sleek enough for the show ring, and the Pro Bamboo Brushing Boots add a bamboo-blend lining that Horseware says wicks moisture and resists odor. Nunn Finer goes traditional with the Capriole Front Brushing Boots in washable leather over a fleece lining, with two straps on the front boots and three on the hind.
LeMieux, Horseware and Nunn Finer brushing boots
LeMieux Arika Mesh and Air-Tek Grafter, Horseware and Nunn Finer brushing boots

Splint boots
Splint boots are the classic cut for the inside of the leg, and Back on Track describes its splint (brush) boots as protection against interference. The Toklat Neoprene Front Split Boot uses heavy 7mm neoprene with suede wear patches and a Loop-N-Lock fastening system, and the Rear Splint Boot brings the same build to the hind legs. The Centaur Neoprene Splint Boots keep the traditional design, with extra padding on the inside of the leg and wide hook and loop straps.
The Back on Track 3D Mesh Splint Boots pair a soft neoprene lining with a 3D mesh outer and shock-absorbent padding, and Back on Track says its Welltex material gives an infrared thermal effect. They fit front or hind legs, and Back on Track suggests one size larger for the hind legs when ordering. A faux fur version is also available from Back on Track.
Questions riders ask
Both cover the inner side of the leg, where one hoof or leg can knock the other. Splint boots are the traditional neoprene design, usually with extra padding on the inside of the leg, as on the Centaur Neoprene Splint Boots. Brushing boots tend to wrap the whole leg and add a strike pad, in mesh, neoprene or fleece-lined versions. Start with a brushing boot for everyday schooling and choose splint boots for the classic front-leg fit.
Size by your horse's height and leg shape, and buy fronts and hinds separately because they can need different sizes. LeMieux's Grafter guide puts a 13.2 to 14 hh pony in small and a 14 to 15.2 hh cob in medium, front and hind. Use Find Your Fit above to jump to your size, then read the size guide on the product page before you order.
Boot the legs your horse knocks. Many boots here fit front or hind legs, such as the Woof Wear Single-Lock, the LeMieux Air-Tek Grafter and the Back on Track 3D Mesh Splint Boots, while Nunn Finer makes Capriole fronts with two straps and hinds with three. If your horse interferes behind, add hind boots, and check that front and hind sizes match each leg.
Brush off dried mud, hose off the rest and let the boots air dry. Equinavia Balder boots are hose off and hand dry, the Vali Ultra Fleece machine washes on gentle, and LeMieux boots machine wash with every hook and loop fastened. Check the care label on your pair before washing, and dry boots flat away from direct heat.