Tack of the Day

The Level Best for Your Horse

Myler Bits

English and Western bits sorted by Myler level, from Level 1 comfort snaffles to ported Level 3 bits, plus combination bits and curb straps.

By the Tack of the Day Product Team · Updated October 2026

Shop All Myler

Myler sorts its bits into four levels, from Level 1 comfort snaffles for young horses to Level 3 ported curbs for finished horses, and builds most of its mouthpieces around a center barrel so each side can move on its own. Pick the level that matches your horse's training, then the mouthpiece, then the cheek or shank your discipline needs.

Shop Myler Bits by Level

Find Your Myler Fit

Filters
Filtered by:
Size:
Category
Department
Subcategory
Department:
Filter Color:
Riding Style:
Cheek Piece Material:
Cheek Piece Type:
Mouthpiece Material:
Mouthpiece Type:
Myler Level:
Myler Mouthpiece:
Price ranges

Myler bit levels explained: compare the line from Level 1 to Level 3

Every Myler bit is named for its mouthpiece, and every mouthpiece sits on one level of Myler's ladder. The higher the level, the more room the mouthpiece leaves for the tongue and the more the bit works on the bars, poll and chin instead.

Most Myler mouthpieces are built around a center barrel. Myler calls it Independent Side Movement: each side of the bit moves on its own, so lifting one rein sends a clear signal to that side of the mouth. Most Level 1 and Level 2 mouthpieces have it; Level 2/3 and Level 3 come with or without it.

  1. Step 1

    Level 1

    Tongue relief: least

    What it does
    Rotates onto the tongue for tongue pressure, and folds without pinching the lips or bars.
    Built for
    Young or green horses starting out, horses with a tricky temperament, and disciplines that allow only a single-jointed bit.
    Move up when
    If your horse resists a Level 1, try a Level 2.
  2. Step 2

    Level 2

    Tongue relief: some

    What it does
    Adds tongue relief through a small port or a flexible mouthpiece, with some tongue pressure left.
    Built for
    Young horses with a steady temperament, older horses learning a new discipline or coming back after time off.
    Move up when
    If your horse resists a Level 2, try a Level 2/3.
  3. Step 3

    Level 2/3

    Tongue relief: more

    What it does
    Ported, with more tongue relief than Levels 1 and 2 and more bar and poll pressure.
    Built for
    Horses with basic training, a good temperament and self-carriage, ready for more tongue relief.
    Move up when
    If your horse resists a Level 2/3, try a Level 3.
  4. Step 4

    Level 3

    Tongue relief: most

    What it does
    Curb bits with wider ports for the most tongue relief, working mainly through bar, poll and curb pressure.
    Built for
    Performance horses with advanced training and a solid temperament, and seasoned trail horses.
    Move up when
    The top of the ladder. Most riders change the cheek or shank here, not the level.

How to read a Myler name

Take the Myler 5 1/2" MBT Shank Low Port Comfort Snaffle MB 04. MB 04 is the mouthpiece and decides the level (Level 2). MBT Shank is the cheek, the part that decides how the bit works with the reins. 5 1/2" on a shank bit is the shank length; the mouthpiece width is the size you choose at checkout. Compare mouthpieces first, then cheeks.

When to look past Myler

Myler is a system, not a guarantee. Riders tell us some horses love a Myler from the first ride and others sour on it after a few weeks, and a horse that chews through everything may be happier trialing a mouthpiece shape in a lower-cost bit first. Compare bits from every brand, including Herm Sprenger and Happy Mouth.

Myler Level 1 bits: MB 01, MB 02, MB 03, MB 09 and MB 10 compared

Myler Level 1 bits are the simplest place to start a horse early in its training: jointed comfort snaffles that rotate onto the tongue. The MB 02 wide-barrel Comfort Snaffle is the one most riders start with.

MouthpieceShapePick it forEnglish cheeks we carryWestern
MB 02Comfort Snaffle, wide barrel Jointed, with a wide center barrelThe classic Myler starter, on more English and Western cheeks than any other Level 1 mouthpieceloose ring, eggbutt, English dee, baucher, full cheek, bradoon, pelhamcombination, Western dee, shanks
MB 01Comfort Snaffle, narrow barrel Jointed, with a narrower center barrelThe same idea as the MB 02 with a slimmer center barrel, on loose rings, Western dees, shanks and a combinationloose ring, English deecombination, Western dee, shanks
MB 03Comfort Snaffle with copper roller Jointed barrel with a copper rollerBusy mouths that like something to play with; the MB 03T adds a twisteggbutt, English dee, full cheek, kimberwickeWestern dee, shanks
MB 09Single joint Single-jointed snaffleDisciplines and classes that ask for a single joint; the MB 09T is twistedloose ring, English deeWestern dee, shanks
MB 10French link Double-jointed French linkHorses already happy in a French link, in an English loose ring or eggbuttloose ring, eggbutt—
Shop Myler Level 1 bits

Myler Level 2 bits: the MB 04 low port and MB 32 mullen compared

Myler Level 2 bits add a little tongue relief for horses moving along in their training. The MB 04 Low Port Comfort Snaffle is the best-selling Myler mouthpiece at Tack of the Day, on English cheeks, Western shanks and combination bits.

MouthpieceShapePick it forEnglish cheeks we carryWestern
MB 04Low Port Comfort Snaffle Barrel with a small port that rotates on the tongueThe default step up from an MB 02 when a horse wants a little more room for its tongue; English cheeks, Western shanks and combinationsloose ring, eggbutt, English dee, full cheek, bradoon, pelhamcombination, Western dee, shanks
MB 32Mullen barrel Mullen-style barrel mouthpiece, no center jointHorses that go better without a joint, mostly on Western dees and shanks; the MB 32-3 is the triple-barrel versioneggbutt, English deecombination, Western dee, shanks
Shop Myler Level 2 bits

Myler Level 2/3 bits: ported mullens and correctional ports compared

Myler Level 2/3 bits give more tongue relief than a Level 2 without jumping straight to Level 3. Most are Western shank bits; the MB 06 and MB 36 also come on English rings, eggbutts and dees.

MouthpieceShapePick it forEnglish cheeks we carryWestern
MB 36Forward Tilt Ported Mullen Mullen with a port tilted forwardThe Level 2/3 mouthpiece we carry in the most styles: English rings and dees, combinations and Western shanksloose ring, eggbutt, English dee, kimberwickecombination, shanks
MB 06Mullen with low port Mullen with a low portAn English-friendly Level 2/3 on loose rings, eggbutts, dees and a bradoonloose ring, eggbutt, English dee, bradoonshanks
MB 43LP / MP / HPNarrow ported barrel Narrow barrel with a low, medium or high portA narrower ported barrel in three port heights, mostly on Western shanks and deesEnglish dee, WeymouthWestern dee, shanks
MB 41PB / 41PBWCorrectional port Myler's correctional port; PBW is the wide versionWestern shank, dee and combination bits for horses ready for more tongue reliefEnglish deecombination, shanks
MB 27 / 27PB / 27HPCorrectional, low or high port Correctional mouthpiece with a low or high portWestern flat and seven shanks, and an English dee—shanks
Shop Myler Level 2/3 bits

Myler Level 3 bits: MB 33, MB 33 WL, MB 05 and MB 16 compared

Myler Level 3 bits leave the most room for the tongue and work mainly on the bars, poll and chin. They are built for horses further along in their training, and the MB 33 comes on more cheeks than any other Level 3 mouthpiece.

MouthpieceShapePick it forEnglish cheeks we carryWestern
MB 33Medium wide ported barrel Barrel with a medium-height, wide portHorses that need real tongue room, on shanks, combinations, pelhams, kimberwickes and English deeseggbutt, English dee, baucher, full cheek, pelham, kimberwicke, Weymouthcombination, Western dee, shanks
MB 33 WLWide low ported barrel Barrel with a wide, low portEnglish riders who want Level 3 tongue room on a loose ring, eggbutt or deeloose ring, eggbutt, English dee—
MB 05 / MB 12Low medium or low narrow port Ported curb mouthpiecesWestern shank and dee bits with a lower port—Western dee, shanks
MB 16 / MB 16PBWide high port High, wide portThe most tongue relief in the line, on Western shanks and an English WeymouthWeymouthshanks
Shop Myler Level 3 bits

Myler cheeks and shanks compared: English rings, dees and Western shanks

The cheek decides how a Myler mouthpiece works with your reins. Snaffle cheeks act directly on the mouth; shanks, combinations, pelhams and Weymouths add leverage through a curb strap and the poll. English riders mostly choose loose rings, eggbutts, dees and bauchers; Western riders choose shanks and combinations.

CheekHow it worksMyler mouthpieces we carry it on
Loose Ring (O-Ring)EnglishThe ring turns freely, so the mouthpiece moves with the horse's mouthMB 01, MB 02, MB 04, MB 06, MB 09, MB 09T and 3 more
EggbuttEnglishA fixed joint that keeps the mouthpiece steady and is less likely to pinch the corners of the mouthMB 02, MB 03, MB 04, MB 06, MB 10, MB 32 and 3 more
D-RingEnglish & WesternFlat-sided rings that sit still and help with steering; Myler makes English and Western deesMB 01, MB 02, MB 03, MB 04, MB 05, MB 06 and 12 more
BaucherEnglishA hanging cheek that holds the mouthpiece still in the mouthMB 02, MB 33
Full CheekEnglishLong cheek arms that help with steeringMB 02, MB 03, MB 04, MB 33
BradoonEnglishThe small snaffle for a double bridleMB 02, MB 04, MB 06, MB 38
WeymouthEnglishThe curb for a double bridleMB 15PB, MB 16PB, MB 33, MB 43LP
PelhamEnglishSnaffle and curb action in one bit, used with two reins or a converterMB 02, MB 04, MB 33
KimberwickeEnglishD-shaped cheeks with a curb strap for mild leverageMB 03, MB 33, MB 36
CombinationEnglish & WesternWorks on the nose, poll and mouth together; Myler sells the noseband kits to go with themMB 01, MB 02, MB 04, MB 32, MB 33, MB 36 and 1 more
Curb shankWesternLeverage bits in several shank lengths and styles, used with a curb strapMB 01, MB 02, MB 03, MB 03T, MB 04, MB 05 and 21 more

About hooks. Some Myler dees, eggbutts and full cheeks come with hooks, a second place to attach the rein. Riders who show in dressage usually choose a version without hooks and check the exact model against their rulebook.

Shop Myler English bits   Shop Myler Western bits

Which Myler bits are legal for dressage, hunters and eventing?

Some Myler bits are show legal and some are not, so check the exact model before you enter. These are the rules we checked in October 2026; rules change, so confirm with your federation's current rulebook.

DisciplineWhat the rules sayMyler options
Dressage (USEF national)USEF Dressage Annex A lists the Myler MB 02, MB 04 low port, MB 06, MB 32, MB 36 and MB 33 WL as permitted snaffles. The Myler 33 ported barrel snaffle is not permitted because its port exceeds 30 mm in height. Snaffle mouthpieces must be at least 10 mm at the rings.Comfort snaffles on loose rings, eggbutts and bauchers
Dressage (FEI and CDI)Snaffles must be at least 12 mm for horses and 10 mm for ponies. The MB 02 is made with 7/16" (11 mm) bars, under the 12 mm minimum, so check thickness before you ride an FEI test. Myler also makes a 14 mm MB 02.14 mm Myler snaffles
Eventing (USEF national)Since September 1, 2024, the Myler Combination bit is permitted in the cross-country and show jumping phases of USEF national eventing. It is not permitted at FEI events, and the approval does not cover dressage.Myler 3-ring combination bits
Hunters (USEF)Three-ring bits and gags other than the hunter gag are illegal in hunter classes and mean elimination. Judges can penalize unconventional bits, and kimberwickes are often cited.Snaffles, pelhams and full bridles

Sources, checked October 22, 2026: USEF Dressage Annex A, bits (2024 edition with July 2024 corrections); USEF Eventing announcement, Myler Combination bit approval effective September 1, 2024; USEF hunter equipment rules as summarized in 2026 rider guides; Myler Bit Levels sheet; maker and retailer specifications for bar thickness.

What riders say about Myler bits, level by level

  • Level 2 · MB 04

    Myler Eggbutt w/Hooks Low Port Comfort Snaffle MB 04

    He has always fought and showed discomfort with every bit I've tried until the Myler Eggbutt Snaffle Bit. It has made all the difference. I think each side having independent movement has been key.
    Rider review · 2024
  • Level 2 · MB 04

    Myler 5" HBT Shank Low Port Comfort Snaffle MB 04

    I have a 5 year old Thoroughbred and was having issues with head tossing and braking. The head tossing seems to have been eliminated with this bit, and he seems to brake easier.
    Rider review · 2025
  • Level 2 · MB 04 combination

    Myler 6" 3 Ring Combination Bit Low Port Comfort Snaffle MB 04

    ★★★★★
    Worked just as I’d hoped. My horse was much more relaxed in this bit and very responsive to the nose and poll pressure. She didn’t chew on this bit as she does others.
    Verified buyer · WY
  • Level 3 · MB 33

    Myler 5" HBT Shank Medium Wide Ported Barrel MB 33

    Myler bits are always quality products, and this bit is no exception. My very picky, large-tongue, low-palate Arabian absolutely prefers this bit over any snaffle he’s ever worn.
    Rider review · 2023
  • Level 3 · MB 33

    Myler 5" HBT Shank Medium Wide Ported Barrel MB 33

    My young draft horse began tossing his head when applying pressure to his current bit (Low, medium port with s shank). He's a mellow guy and doesn't need a lot of leverage so I switched to this bit to provide more tongue relief and make grazing easier when on the trail. He has stopped tossing his head and seems to be much happier.
    Rider review · 2026
  • Level 3 · MB 33 WL

    Myler Loose Ring w/Wide Low Ported Barrel MB 33 WL

    My western dressage horse was struggling with connection and my test scores were reflecting that. He would evade the bit, chomp his teeth, and gape his mouth. … I selected the MB33WL loose ring snaffle. It's a level 3 bit for maximum tongue relief. I cannot believe the difference! … He actually seeks the contact now!
    Rider review · 2015

Rider reviews are quoted word for word from public rider discussions and checked against the original posts, October 2026. Verified buyer reviews come from Tack of the Day and Bit of Britain orders.

Myler bits FAQ

What do the Myler bit levels mean?

Myler grades each mouthpiece by how much tongue relief it gives. Level 1 comfort snaffles rotate onto the tongue for young or green horses, Level 2 adds a small port or a flexible mouthpiece, Level 2/3 is ported with more bar and poll pressure, and Level 3 ported curbs give the most tongue relief for horses with advanced training.

What is the difference between the Myler MB 02 and MB 04?

The MB 02 is a Level 1 jointed Comfort Snaffle with a wide center barrel. The MB 04 is the Level 2 Low Port Comfort Snaffle: the same idea with a small port that gives the tongue a little more room. Riders often move from an MB 02 to an MB 04 when a horse starts to resist the Level 1.

Which Myler bit should I start with?

Start from your horse's training, not the bit you want to end in. A young or green horse usually starts in a Level 1 comfort snaffle such as the MB 02; a horse coming back to work or changing disciplines often starts in a Level 2 MB 04. If your horse resists, move up one level.

Are Myler bits dressage legal?

Some are. USEF Dressage Annex A lists the MB 02, MB 04 low port, MB 06, MB 32, MB 36 and MB 33 WL as permitted snaffles, while the Myler 33 ported barrel snaffle is not. For FEI tests, snaffles must be at least 12 mm for horses, and the standard MB 02 has 11 mm bars, so check thickness or choose a 14 mm version.

Can I use a Myler combination bit for eventing or hunters?

For USEF national eventing, yes: since September 1, 2024 the Myler Combination bit is permitted in cross-country and show jumping, but not at FEI events and not in dressage. In USEF hunter classes, three-ring bits mean elimination, so choose a snaffle or pelham there.

What size Myler bit do I need?

Measure your horse's mouth straight across where the bit sits and choose that width; loose rings usually need an extra 1/8" to 1/4" so the rings don't pinch. Most Myler bits we carry come in 5", with sizes from 4 1/4" to 6". One rider tells us Myler horse sizes run about half an inch large, so compare against the bit your horse wears now.

Is Myler as good as Herm Sprenger?

Riders split. Some tell us Myler is the same quality as Herm Sprenger for less money; others prefer the Sprenger KK Ultra and still have good results with Myler. The two take different approaches: Myler grades mouthpieces by level, while Herm Sprenger refines one anatomical shape. Tack of the Day carries both.

About Myler Bits

Myler bits are built around how a mouthpiece works on the horse, sorted into levels so riders can match the bit to the horse's training. Shop Myler at Tack of the Day for top brands for less, with new deals every day. Myler is part of the Toklat family of brands.